Home / Blog / Anterior open bite with clear aligners

Clear aligners

Anterior Open Bite with Clear Aligners: What the Evidence Says and How to Plan It

Anterior open bite used to be a case many clinicians kept away from aligners. Better attachments, staging and auxiliaries have changed that, and there is now a growing body of research on aligner open bite treatment in adults. Here is what the studies show, where the limits are, and how we plan these cases.

By ClearPerfect Clinical Team·November 14, 2026·7 min read

Key takeaways

  • Studies report useful overbite gains with aligners in mild to moderate adult open bites, but the evidence is still mostly retrospective.
  • Most closure comes from incisor extrusion, with molar intrusion adding to it. Both are among the less predictable aligner movements.
  • Diagnose first: a dental open bite and a skeletal open bite need very different plans.
  • Plan for refinements, use attachments for extrusion, and consider TADs or elastics when real posterior intrusion is needed.

Can clear aligners treat anterior open bite?

In adults with mild to moderate open bites, the answer from current research is a cautious yes. A 2024 systematic review in Oral looked at five clinical studies of adults treated with aligners. Overbite increased in all of them, by between about 1.3 mm and 3.4 mm, and in one cohort 94% of patients finished with a positive overbite. The authors still rated the evidence as weak: all five studies were retrospective and had a moderate risk of bias.

A 2025 scoping review in Medicina mapped 30 studies and reached a similar conclusion. Aligners are a promising option for adult open bite, but long-term stability data are limited and better-designed trials are needed. A cephalometric study by Garnett and colleagues in The Angle Orthodontist also found no significant difference in overbite correction between aligners and fixed appliances in hyperdivergent adults.

How the bite actually closes

An open bite can close in two ways: the front teeth come down (incisor extrusion), or the back teeth go up (molar intrusion), which lets the mandible rotate closed. In aligner studies, incisor extrusion is usually the main mechanism. Molar intrusion often helps, but the amount varies between studies. One cohort found that each millimetre of upper molar intrusion added roughly 1.2 mm of overbite.

Aligners cover the occlusal surfaces, and some clinicians believe this "bite block" effect helps control the vertical dimension. The research on this is mixed, so it is safer to plan the movements you need than to rely on it.

Dental or skeletal: diagnose before you plan

FindingWhat it suggests for planning
Normal mandibular plane angle, open bite limited to the incisorsOften a dental open bite. Relative extrusion and retroclination of the incisors may be enough.
High mandibular plane angle, long lower faceSkeletal pattern. Real posterior intrusion, often with TADs, may be needed. Discuss limits early.
Open bite of about −3 to −4 mm or moreModerate to severe. Expect refinements, and consider whether aligners alone are realistic.
Tongue thrust, mouth breathing or digit habitsTreat or manage the habit as well, or relapse risk rises.
Large incisal display at rest or a gummy smileBe careful with upper incisor extrusion. It can make the smile worse.

What is predictable, and what is not

Vertical movements are among the hardest for aligners. Reviews of aligner accuracy report that extrusion is often achieved only partly, and the 2025 scoping review cites one study in which only about 30% of the planned extrusion was reached. A guide quoted in the same review treats anterior extrusion up to about 2.5 mm and posterior intrusion up to about 0.5 mm as predictable, with anything much beyond that considered difficult.

Refinements are common in these cases. Several studies in the scoping review needed additional aligners in most patients, so it is better to plan for a refinement than to promise a single series.

Planning tips that reduce refinements

  1. Prefer relative extrusion. Retroclining proclined incisors and closing spaces deepens the bite without as much true extrusion.
  2. Use attachments for every extrusion. Teeth that need to come down need something for the aligner to grip, such as beveled or optimized attachments on incisors and canines.
  3. Stage vertical movements slowly. Small steps per aligner and enough stages give the teeth time to follow.
  4. Overcorrect. Plan a little more overbite than you need at the end, because some of the planned movement will not express.
  5. Plan posterior intrusion only when you can support it. For real molar intrusion, TADs or elastics give the anchorage that aligners alone often lack.
  6. Watch the smile. Limit upper incisor extrusion when there is already plenty of incisal display, and share the expected smile change with the clinician.
  7. Plan retention from the start. Long-term data are limited, so discuss retainers and habit control before treatment ends.

When aligners alone may not be enough

  • Severe skeletal open bites with a very high mandibular plane angle.
  • Cases needing more posterior intrusion than aligners can deliver without TADs.
  • Patients with a persistent tongue habit that is not being managed.
  • Cases where the patient's goals need orthognathic surgery. Aligners can still be used before or after surgery when the surgical team agrees.
Planning an open bite case? Send us the scans and records and our clear aligner planning team will stage the vertical movements, place the attachments and flag any limits before you approve the setup.

This article is for dental professionals and is for general education only. It is not clinical advice for a specific patient. Treatment decisions remain the responsibility of the prescribing clinician. See our clinical disclaimer.

Send us your first case, free.

See our planning, design and quality checks on a real case before you commit. NDA available on request.