Home / Blog / Digital denture design: records checklist

Digital dentures

Digital Denture Design: The Records Checklist for Clinics and Labs

Digital dentures can save chair time and produce well-fitting, retentive bases, but the design is only as good as the records behind it. A designer cannot guess a vertical dimension or a smile line. This checklist covers what to send for a digital complete denture design, and what the research says about how digital dentures perform.

By ClearPerfect Clinical Team·November 14, 2026·6 min read

Key takeaways

  • Reviews find CAD-CAM complete dentures are not inferior to conventional dentures, with better retention and less chair time in several studies.
  • Intraoral scans capture the ridge well, but borders and the posterior palate are harder. Many workflows still scan a border-molded impression.
  • The jaw relation record and the vertical dimension matter more than any design setting.
  • Photos, an existing denture and clear tooth setup notes save remakes.

How well do digital dentures perform?

A 2021 systematic review and meta-analysis in the Journal of Dentistry by Srinivasan and colleagues included 73 studies of milled and 3D-printed complete dentures. CAD-CAM dentures showed better retention than conventional dentures, needed less chairside time and had lower overall costs, and the authors concluded they were not inferior to conventional dentures. Milled dentures had the best mechanical and surface properties, while printed dentures showed poorer colour stability.

A separate 2021 systematic review in the Journal of Prosthetic Dentistry by Chappuis Chocano and colleagues found similar results: better retention, better tissue adaptation, less clinical time and higher patient satisfaction with CAD-CAM dentures. Both reviews noted that more randomized studies with longer follow-up are still needed.

Scans or impressions?

A 2023 systematic review of intraoral scanning in edentulous arches found that scanners record firm, attached tissue about as accurately as conventional impressions. The movable border tissues and the soft palate are harder to capture, so the peripheral seal area needs careful interpretation.

In practice there are two reliable routes:

  • Intraoral scan: works well for many cases, especially with firm ridges. Retract the lips, cheeks and tongue, and capture the full denture-bearing area including the retromolar pads and the vibrating line.
  • Scanned impression: a border-molded final impression, scanned in the lab or with a desktop scanner. Often the safer choice when borders and the posterior seal are critical.

The records checklist

RecordWhat we need and why
Upper and lower archesIntraoral scans or scanned border-molded impressions covering the full denture-bearing area.
Jaw relationA bite record or scanned record bases at the agreed vertical dimension, in centric relation.
Vertical dimensionConfirmed by the clinician. The designer works to it and cannot set it reliably from scans alone.
Esthetic referencesMidline, smile line, lip support and occlusal plane, marked on the rims or noted in the prescription.
PhotosFace at rest and smiling, front and profile, ideally with the rims in place.
Existing dentureA scan of the current denture if the patient is happy with parts of it. It can be copied or improved.
Tooth setup detailsTooth library or mould, shade, occlusal scheme and any specific requests.
ManufacturingMilled or printed, the material system and any lab settings for the base and teeth.

Common mistakes that cause remakes

  • Scans that stop short of the borders, retromolar pads or posterior palate.
  • A bite record taken at the wrong vertical dimension, or not in centric relation.
  • No midline or smile line reference, so the setup has to be guessed.
  • Missing photos, which makes lip support and tooth display hard to judge.
  • No information about the manufacturing system, so the design does not match the lab's milling or printing setup.

Before you approve the design

  1. Check the borders and the posterior seal on the design against the scan.
  2. Check the vertical dimension and occlusion match the record you sent.
  3. Check the esthetics: midline, incisal display, lip support and the occlusal plane.
  4. Consider a try-in. A printed try-in denture is a simple way to confirm fit, bite and esthetics before the final denture is made.
Need dentures designed? Our digital denture design service designs complete dentures and RPD frameworks to your records, ready for printing or milling.

This article is for dental professionals and is for general education only. It is not clinical advice for a specific patient. Treatment decisions remain the responsibility of the prescribing clinician. See our clinical disclaimer.

Send us your first case, free.

See our planning, design and quality checks on a real case before you commit. NDA available on request.